A flexible low voltage lighting system for under cabinet, cove, display case and accent lighting applications. Utilizing a remote low voltage, 12V or 24V transformer at 25 amps, Invizilite Generation 2 allows for long lighting runs, movable pre-installed sockets
and a flexible cable allows for creative solutions for the most challenging lighting applications.
Super-flexible two-copper conductor cable with self healing PVC insulation rated at 90 degrees 12V or 24V, 25 amp maximum - 300W / 12V, 600W / 24V White or Black finish
For use with festoon style low voltage Xenon lamps, Invizilite Generation 2 MR adapter (INVMR) & LED modules. High grade clear polycarbonate housing construction with stainless steel clips and aluminum heat shield. Socket and base snap together on the Invizilite cable securing to the system without the use of a track. Socket can be easily removed by use of flat head screw driver and be re-installed if desired.
Pre-attached double -sided tape and mounting ear for secure installation.
Snaps into Invizilite tracks.
Power Feed (INVPW1) & Dead End (INVDE1):
Power feed is a UL & cUL listed
30 amp terminal block, 10awg max. Housing and hinged lid are constructed of high grade polycarbonate. Dead end termination, snaps over end of cable with no tool. Constructed of high grade clear polycarbonate, includes double sided tape and mounting ear.
Options include 12V and 24V Xenon lamps offered in 3W, 5W and 10W clear of frosted festoon base, 12V and 24V MR11 & MR8 20W max and 12V & 24V
LED modules at 1.4W and .75W
Remote low voltage power source, 12V 300W max / 24V 600W
max. See transformer specifications for more information. Listings: UL & cUL listed as a damp low voltage lighting system for Class 1 & Class 2 wiring applications.
- Conceals the glare and light leak from the reflector shell of an MR-11 lamp
- Easily snaps around MR adapter
- 3 finish options: White, Black and Satin Aluminum